PermeGear Franz Cells

                 ( 경피제제 용출시험기, 피부흡수실험기, 경피흡수실험기 )

              Franz Cell 6-station Stirrers

PermeGear’s new V6-VS 6-station variable speed stirrer provides stirring speeds from 300 rpms to 1200 rpms in 50 rpm increments. It allows for robustness testing of diffusion methods. The new V6-VS shares the same footprint as the V6-CB-01 and V6-CB-02 models. All PermeGear jacketed Franz Cells that fit into the previous stirrers fit into the V6-VS. Connections to a heater/circulator are the same as well. The anodized cell holders and stainless steel finish make it resistant to damage from most spills. The V6-VS is compatible with 90 to 220 volt power sources.

FEATURES

• Adjustable speed from 300 to 1200 rpm
• Compatible with existing diffusion cells
• Same footprint as existing models
• Reliable keypad and LCD interface

CELLS

Orifice Diameter: + 0.5 mm, typically within + 0.3 mm
Volume: + 0.5 mL of stated, typically within + 0.3 mL

TECHNICAL SPECIFICATIONS

*Height & Weight measurements are given without Franz Cells

This stirrer with black anodized aluminum cell holders is otherwise identical to the V6A Stirrer. It is available in 110/120 volt and 220/240 volt configurations with power cords appropriate for the customers electrical supply.

PermeGear V-Series Stirrers are made for use with our Franz cells. These units do not have temperature control of any kind. They have aluminum supply manifolds mounted toward the rear that connect to a user supplied water bath and pump or heater/recirculator.

DIFFUSION CELLS MUST BE ORDERED SEPARATELY!

Dimensions:

V3A is 20″/50.8 cm wide x 8″/20.3 cm deep x 7.25″x 18.4 cm high & weight is 14 lbs/6.3 5kg

V3B is 20″/50.8 cm wide x 8″/20.3 cm deep x 7.25″x 18.4 cm high & weight is 16 lbs/7.26 kg

V6-CA is 18″/45.7cm wide x 8″/20.3cm deep x 7.25″x 18.4cm high & weight is 16.5 lbs/7.48 kg

V6-CB is 18″/45.7cm wide x 8″/20.3cm deep x 7.25″x 18.4cm high & weight is 19.75 lbs/8.96 kg

V9-CA is 30.8″/78.2cm wide x 8″/20.3cm deep x 7.25″x 18.4cm high & weight is 26 lbs/11.79 kg

V9-CB is 30.8″/78.2cm wide x 8″/20.3cm deep x 7.25″x 18.4cm high & weight is 31 lbs/14.06 kg

V9A is 50″/127 cm wide x 8″/20.3 cm deep x 7.25″x 18.4 cm high & weight is 32 lbs/14.52 kg

V9B is 50″/127 cm wide x 8″/20.3 cm deep x 7.25″x 18.4 cm high & weight is 39 lbs/17.69 kg

*Height & Weight measurements are given without Franz Cells

Heater Circulator:
Working Temperature Range: 20ºC to 150ºC
Temperature Stability: +0.03ºC
Flow Rate: 15 L/min

Stirring RPMS:
120V 60Hz: 600 rpm +/- 10 rpm
230V 60Hz: 600 rpm +/- 10 rpm
230V 50Hz: 500 rpm +/- 10 rpm

Cells:
Orifice Diameter: + 0.5 mm, typically within + 0.3 mm
Volume: + 0.5 mL of stated, typically within + 0.3 mL